Comsel Zodiac


Smart meters delivering highest possible service levels.

Comsel Z3 module

High SLA. Zodiac uses a robust combination of connectivity methods and approaches to enable industry leading service levels.
Low cost of use. Zodiac uses highly efficient communication protocols to lower the cost of use.
Scalable. Comsel devices and technologies are designed to work in a distributed fashion which enables highly efficient infrastructure scaling.

The meter independent metering solution

The Comsel Zodiac Smart Metering Module is a communication module designed for stand-alone operation as well as integration into various meters. All Zodiac devices look the same to computer systems regardless of what they measure, which enables the reuse of technology and infrastructure investments for all your metering needs, from small and large energy consumers to district heating sites. Zodiac combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Zodiac comes equipped with a LTE/3G/GPRS modem. In addition to the LTE/3G modem, Zodiac is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Zodiac uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Zodiac supports all types of metering registers and is able to monitor power quality or district heating quality parameters locally for fast actions, dynamically log changes and notify the control systems if abnormal situations appear. The module supports measurements in both import- and export directions and can use multiple configurable tariffs in both directions. With an efficient and configurable alert system the module can quickly detect deviations such as for instance, phase outages, voltage problems from phase dropouts to sags and swells, and instantly alert you about the situation.

The Zodiac family

  • Comsel Z3c

    Comsel Zxc

    for Landis+Gyr E350 ZCF
     
    Single Phase/Two-wire
  • Comsel Z3m Comsel Z3m for CST 0420

    Comsel Zxm

    for Landis+Gyr E350 ZMF
    and AEM CST-0420
    Three Phase/Four-wire
  • Comsel Z3f Comsel Z3f for CST 0420

    Comsel Zxf

    for Landis+Gyr E350 ZFF
    and AEM CST-0420
    Three Phase/Three-wire
  • Comsel Zxe

    Comsel Zxe

    Meter independent
     
    Single Phase/Two-wire
    Three Phase/Three-wire
    Three Phase/Four-wire
  • Comsel Oculus

    Comsel Oculus

    Meter independent, IR
     
    5V micro-USB, 2A
     
     
  • Comsel Gemini

    Comsel Gemini

    Meter independent, M-Bus/RS-485
     
    Single Phase/Two-wire
    Three Phase/Three-wire
    Three Phase/Four-wire

Comsel Zxc for Landis+Gyr E350 ZCF

Description

The Comsel Zx (Zxc, Zxm and Zxf) Smart Metering Module is a communication module designed for usage with Landis+Gyr E350 and AEM CST-0420 meters. Zx combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Zx comes equipped with a 3G/GPRS or LTE modem. In addition to the LTE/3G modem, Zx is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Zx uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Zx supports all registers available in the E350 and CST meters and can thus monitor power quality parameters such as power, voltage, frequency and power factor. The module supports measurements in both import- and export directions and can use multiple configurable tariffs in both directions. With an efficient and configurable alert system the module can quickly detect deviations such as for instance, phase outages, voltage problems from phase dropouts to sags and swells, and instantly alert you about the situation.

Technical Specification

Operating Voltage
1 x 230 V, 50 Hz
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Real-time clock
Clock accuracy: ±1s/24h (in 25°C)
Automatic NTP time synchronization
Backup power: 10 days
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE
Ethernet: RJ-45 10/100Mbps
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions (terminal)
Height: 34.5 mm
Width: 124.0 mm
Length: 103.5 mm
Weight (terminal)
Weight: 152 grams
Dimensions (meter and terminal)
Height: 87 mm
Width: 135 mm
Length: 220 mm
Weight (meter and terminal)
Weight: 1 kg

Comsel Zxm for Landis+Gyr E350 ZMF and AEM CST-0420

Description

The Comsel Zx (Zxc, Zxm and Zxf) Smart Metering Module is a communication module designed for usage with Landis+Gyr E350 and AEM CST-0420 meters. Zx combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Zx comes equipped with a 3G/GPRS or LTE modem. In addition to the LTE/3G modem, Zx is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Zx uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Zx supports all registers available in the E350 and CST meters and can thus monitor power quality parameters such as power, voltage, frequency and power factor. The module supports measurements in both import- and export directions and can use multiple configurable tariffs in both directions. With an efficient and configurable alert system the module can quickly detect deviations such as for instance, phase outages, voltage problems from phase dropouts to sags and swells, and instantly alert you about the situation.

Technical Specification

Operating Voltage
3 x 230/400 V, 50 Hz
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Real-time clock
Clock accuracy: ±1s/24h (in 25°C)
Automatic NTP time synchronization
Backup power: 10 days
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE
Ethernet: RJ-45 10/100Mbps
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions (terminal)
Height: 34.5 mm
Width: 124.0 mm
Length: 103.5 mm
Weight (terminal)
Weight: 152 grams
Dimensions (meter and terminal)
Height: 84 mm
Width: 176 mm
Length: 260 mm
Weight (meter and terminal)
Weight: 1.3 kg

Comsel Zxf for Landis+Gyr E350 ZFF and AEM CST-0420

Description

The Comsel Zx (Zxc, Zxm and Zxf) Smart Metering Module is a communication module designed for usage with Landis+Gyr E350 and AEM CST-0420 meters. Zx combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Zx comes equipped with a 3G/GPRS or LTE modem. In addition to the LTE/3G modem, Zx is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Zx uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Zx supports all registers available in the E350 and CST meters and can thus monitor power quality parameters such as power, voltage, frequency and power factor. The module supports measurements in both import- and export directions and can use multiple configurable tariffs in both directions. With an efficient and configurable alert system the module can quickly detect deviations such as for instance, phase outages, voltage problems from phase dropouts to sags and swells, and instantly alert you about the situation.

Technical Specification

Operating Voltage
3 x 230 V, 50 Hz
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Real-time clock
Clock accuracy: ±1s/24h (in 25°C)
Automatic NTP time synchronization
Backup power: 10 days
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE
Ethernet: RJ-45 10/100Mbps
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions (terminal)
Height: 34.5 mm
Width: 124.0 mm
Length: 103.5 mm
Weight (terminal)
Weight: 152 grams
Dimensions (meter and terminal)
Height: 84 mm
Width: 176 mm
Length: 260 mm
Weight (meter and terminal)
Weight: 1.3 kg

Comsel Zxe

Description

The Comsel Zxe Smart Metering Module is a meter independent communication module which can easily be installed over the screw terminals on both direct and indirect electricity meters. Zxe combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Zxe comes equipped with a 3G/GPRS or LTE modem. In addition to the LTE/3G modem, Zxe is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Zxe uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Technical Specification

Operating Voltage
1 x 230 V, 50 Hz
3 x 230 V, 50 Hz
3 x 230/400 V, 50 Hz
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Real-time clock
Clock accuracy: ±1s/24h (in 25°C)
Automatic NTP time synchronization
Backup power: 10 days
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE
Ethernet: RJ-45 10/100Mbps
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions (terminal)
Height: 80 mm
Width: 178 mm
Length: 100 mm
Weight (terminal)
Weight: 500 grams

Comsel Oculus

Description

Comsel Oculus is a meter independent communication module, which is able to communicate with both electricity and heating meters using the standardized IR-interface for meter reading. Oculus is able to communicate with meters using both IEC 62056-21 and M-Bus over IR.

Oculus combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Oculus comes equipped with a 3G/GPRS modem, LTE modem or ethernet. In addition to the LTE/3G modem or ethernet Oculus is capable of using redundant connection paths using the built in WiFi-module. Oculus uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Oculus supports all types of metering registers and is able to monitor power quality or district heating quality parameters locally for fast actions, dynamically log changes and notify the control systems if abnormal situations appear. The module supports measurements in both import- and export directions and can use multiple configurable tariffs in both directions. With an efficient and configurable alert system the module can quickly detect deviations such as for instance, phase outages, voltage problems from phase dropouts to sags and swells, and instantly alert you about the situation.

Technical Specification

Operating Voltage
1 x 230 V, 50 Hz
5 V DC, 2A micro-USB
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE (option)
Ethernet: RJ-45 10/100Mbps (option)
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions
Height: 40 mm
Width: 53 mm
Length: 67 mm
Weight
Weight: 100 grams

Comsel Gemini

Description

Comsel Gemini is a meter independent communication module, which can easily be integrated in various metering scenarios thanks to the standardized M-Bus (wired and wireless) and RS-485 interfaces.

Gemini combines state-of-art systems and technology with a robust and highly available platform. It supports online, over-the-air reconfiguration and updates, has an ability to store several million values locally and can be configured to log readings at intervals down to 10 seconds.

In order to enable zero-configuration deployment almost everywhere, Gemini comes equipped with a 3G/GPRS or LTE modem. In addition to the LTE/3G modem, Gemini is capable of using multiple redundant connection paths with the built-in Ethernet and WiFi-modules. Gemini uses state-of-the-art network security in order to ensure secure delivery of meter values as well as verifiable software updates and configuration changes.

Comsel Gemini can be integrated in an M-Bus network as a master and supports all types of M-Bus devices. The module supports measurements in both import- and export directions, various different measurement quantities and can use multiple configurable tariffs for all measured quantities. With an efficient and configurable alert system the module can quickly detect deviations and instantly alert you about the situation.

Technical Specification

Operating Voltage
1 x 230 V, 50 Hz
3 x 230 V, 50 Hz
3 x 230/400 V, 50 Hz
Temperature range
-40 to +60°C, Non-condensing <95 % humidity
Real-time clock
Clock accuracy: ±1s/24h (in 25°C)
Automatic NTP time synchronization
Backup power: 10 days
Wide area networking connectivity
LTE, Dual-band UMTS/HSPA, Dual-band GSM/GPRS/EDGE
Ethernet: RJ-45 10/100Mbps
WiFi: 802.11 b/g/n
Home area networking connectivity
WPAN: 802.15.4 Ready
WiFi: 802.11 b/g/n
Bluetooth Low Energy
Dimensions
Height: 70.5 mm
Width: 95 mm
Length: 255 mm
Weight
Weight: 500 grams

Want to know more?

We would gladly send you more information regarding Zodiac, Corona and Neuron. Please fill in this form or contact sales directly.

Submit